Currently, the FIBARO system is the best building automation solution available on the market.
It offers a non-invasive installation process, which eliminates the need to run meters of cables. Our miniaturized modules can be installed in any wall switch box, behind a light switch, roller blind switch, etc., and are compatible with every electrical system.
It is the only system available on the market capable of controlling LED lighting or fluorescent lights in electrical systems without a neutral wire (old-type electrical systems).
Fibaro devices do not connect permanently to building's infrastructure. So, if you wish to redecorate your apartment, take down some walls and change the interior design concept... It's not a problem. Just do it. Simply take out any given module from the wall and install it in a new location. Thanks to mesh network, the module will update its location and resume cooperation with remaining system components.
DPN-6608 & DPN-101G
Compatibility and the Z-Wave technology
Fibaro offers full freedom of control and communication, as it is compatible with majority of mobile phones available on the market. Fibaro is compatible with wireless products from nearly 300 independent manufacturers and with all other devices, which may be controlled using systems manufactured by our competitors.
It is compatible with all IP cameras available on the market - upon detecting an incident, the system will send a picture or a video to your mobile phone.
FIBARO Z-Wave modules:
- Compatible with any Z-Wave home automation system,
- Fibaro electronic modules are smallest devices of the type in the World and can be installed in all standard wall switch boxes,
- Each module can be installed in 3 minutes, using just a screwdriver,
- Designed and made in EU, in compliance with all EU regulations,
- Available in competitive prices.
Adding a device to the Home Center
In order to complete the installation process, you need to add the installed device to our Home Center 2 (HC2), i.e. Fibaro System database. By putting the Home Center into “LISTENING MODE” and pressing the button located on the back of device three times, you will complete the installation process. Thanks to the innovative Z-Wave technology, the Fibaro devices can easily communicate with HC2, making the installation process of the Fibaro System easy and affordable.
Simple and non-invasive installation
To ensure your safety, an electrician or a trained person should install the system. The picture below shows an example of the installation process for one of Fibaro’s modules.
The main premise behind the Fibaro System is the possibility to install it in any house, apartment or office building, without damaging the infrastructure. We offer you full control over your house, without the need to damage walls, modify switching stations or exchange switch-keys. It is our system that adjusts to your requirements, and not the other way round. It is one of the many differences which sets us apart from our competitors.
The Intelligent Home Center 2
Fibaro System checks and monitors status of individual devices and, if necessary, informs you of an incident. It is the only system on the market which knows an exact position of a pulled-up roller blind or an awning, etc. It updates automatically. It automatically creates backup copies of saved settings and sends them to external servers. Battery-powered components will inform you well in advance of the need to change energy source. If you go on holiday and forget to turn the heating off, Fibaro will send you a message asking if it should do it for you.
Home Center 2 (HC2) is the brain to the Fibaro Intelligence System and can be used with other existing Z-Wave automation devices. HC2 was designed and developed by our engineers, giving us the ability to implement many unique features never seen before in other Z-Wave gateways. HC2 redefines Z-Wave based home automation and introduces real Home Intelligence.
Exclusive aluminium casing
We have put a huge emphasis on styling and quality, so that Home Center 2 by Fibaro pleases you from the first time you look at it. Home Center 2 is made of solid aluminum, making it very elegant in appearance with true innovation inside.
Extremely quick and efficient hardware structure
Intel Atom 1,6Ghz Processor
Thanks to its efficiency, Home Center 2 (HC2) is much, much faster than other Z-Wave gateways currently on the market. The communication within the Z-Wave network has improved dramatically allowing the HC2 to have immediate response to commands sent by the system user.
4GB MLC Recovery Disc
Gives you significantly improved data security thanks to Fibaro's proprietary approach to data protection. Each Home Center 2 has its own Recovery disc for system backup unique to each gateway. This completely prevents unauthorized access to the system. Another advantage of the HC2 is quick and simple back up recovery securing all of your settings.
1GB RAM, 2GB SLC Hard Drive
Large memory + fast processor = quick communication between HC2 and Z-Wave devices. The hardware architecture used in the Fibaro HC2 makes Z-Wave based home automation communication faster and unique.
Quick and easy installation
After ca.2 minutes from connecting to power socket, Home Center 2 is ready to operate. By default, Home Center 2 waits to get an IP address from Your DHCP server. If unsure, hold RECOVERY button for a while when power on. By doing this Home Center 2 will automatically get static IP 192.168.81.1 To access the control panel, type the Home Center 2 IP address in your web browser's address bar.
Home Center 2 gives You another unique functionality - finding Your family members. Now You can always know where are Your children, without the need to call them each 5 minutes. Home Center 2 will get their localization for You.
The graphic interface
It is the only system with a simple configuration interface allowing you to change dependencies between devices, scenes and the entire system intelligence from any computer at any time, without any specialist software or the need to call technical service.
Home Center 2 by Fibaro isn't just an electronic device. It's also well designed, innovative and user friendly interface, featuring functions never seen before.
Great comfort thanks to Devices Panels
The Home Center 2 interface gives you easy control over certain groups of devices responsible for the same functionality - heating, air conditioning and garden watering. Thanks to Devices screen, you can easily schedule operations for these groups of devices based on the day of the week or the time of day.
New possibilities thanks to Linked Devices
Home Center 2 “Linked Devices” function lets you combine multiple devices into one virtual device with combined functionality – for example 3 heater thermostats plus temperature and humidity sensors. The primary advantage of this feature is the convenience of being able to control multiple devices at the same time at the press of one button. The second advantage is reducing the number of device icons in the user interface.
Inspired by nature
Beauty comes from nature, advanced technology from people. FIBARO extracts the essence of both and creates perfection. In conjunction with the immutable laws of architecture and the latest technology, the FIBARO Motion Sensor was created – your eye on the home. Inspired by the beliefs of the ancient Egyptians, we have designed the world's smallest, wireless motion sensor and shaped it like a cat's eye.
For centuries the cat symbolized a guardian of people and the home. Additionally, it is known as a predator with excellent eyesight, above average hearing and exceptional vigilance. The FIBARO Motion Sensor is as sharp as a cat's eye; it sees wider and farther so it can notice what you are unable to see. It has a wide field of view, long range and is incredibly vigilant. Not only will it make your life more comfortable, but it will also make you feel safer.
In taking up the challenge of innovation, we have developed an intelligent work of art that combines four useful functions to give you MORE. This tiny device, apart from detecting movement, measures the current ambient temperature, intensity of light and vibrations thanks to its built-in accelerometer.
The FIBARO Motion Sensor expands the comfort of your reality. Create custom scenarios, so you can forget about nasty situations and enjoy the luxury of safety - its watchful eye will detect any intrusion or attempted sabotage, fire or other threats. Now you know and see more!
Small is beautiful!
The world's most advanced technology has been enclosed in a flawless white casing. With a diameter of less than 44 millimetres, you will love it at first sight!
Colour announces movement and temperature
Motion and temperature The multicolour LED pupil of the FIBARO Motion Sensor informs family members if it has detected any motion or the current temperature of a room. Set the colour and its intensity to your liking and, as soon as you enter a room, you will know what the temperature is there
Watch your home and your loved ones
Wondering what's going on at home when you are away? While you are at the office, or on a business trip, the FIBARO Motion Sensor will watch your home and protect your loved ones. In addition, the FIBARO Motion Sensor monitors how much time someone spends in a room. So you will be informed when your kids spend most of their time watching TV in the living-room instead of doing their homework in their rooms, and then you will be able to turn the TV off remotely.
More Intelligent object recognition Sensor
One of the main features of the FIBARO Motion Sensor is its excellent ability to detect even the slightest motion; nothing escapes its attention. Given that all rooms are different, you can also adjust the Motion Sensor’s sensitivity to suit its location in the house, your individual needs or a particular situation.
Count the guests
After installing FIBARO Motion Sensors on both sides of the entrance to your home, you will always know how many people entered or left your house, or a given room. No need to worry about a teenager being home alone. The FIBARO Motion Sensor will tell you what time he or she went out, came back home, or how many visitors he or she had.
It learns your habits
The FIBARO Motion Sensor's ability to analyse your habits allows the system to take certain actions automatically for your comfort and savings. You can connect two controllers operating within one FIBARO System to manage your home, based on the information collected by the controller installed in your office. As long as the Motion Sensor installed in your office recognises you are still there, the controller installed in your house reduces the heating temperature until you return.
For the youngsters
The FIBARO Motion Sensor will wait and turn off the bedside lamp after your child falls asleep. Your little one will fall asleep peacefully, without stress, and you won’t have to worry about the bills.
The house wakes up with you
The FIBARO Motion Sensor makes every morning wonderful. When you wake up, the sensor will start a pre-programmed wake-up scenario. The temperature will be set how you like it, windows will open to give you a breath of fresh air and blinds will open to let the sunshine in. Meanwhile, the smell of fresh ground coffee will waft from your kitchen...
Mobility is its greatest feature
The FIBARO Motion Sensor is powered by a long lasting battery, allowing the device to operate for up to three years. The absence of hard wires in favour of wireless Z-Wave communication with the main controller, enhances the device’s ability to operate anywhere inside your house.
Attach it anywhere
The clever holder allows you to put the sensor anywhere, or fix it permanently to a wall, ceiling or other surface. You can change the sensor’s location whenever you need to.
To keep you and your family safe, the FIBARO Motion Sensor has built-in tamper protection. Any attempt to relocate or change the sensor's view angle will trigger the alarm and the system will inform you by sending a message to your mobile devices.
Earthquakes happen quite frequently, and even a minor one can be highly dangerous. Thanks to its built-in accelerometer, the FIBARO Motion Sensor will detect even the slightest vibrations, which you would not be able to feel yourself. A notification sent by the system will warn you against the impending threat, giving you time to take the necessary precautions.
A comfortable temperature is crucial for our well-being. The FIBARO Motion Sensor has a built-in temperature sensor to meet all your requirements. The temperature at ceiling level is different to that close to the floor. All you need to do to get the heating temperature right is to measure the temperature at floor level, using any sensor, and tell the Motion Sensor to compensate for the difference.
The Flood Sensor
The most beautiful and functional flood sensor ever made
Fibaro Flood Sensor – futuristic design, compact size, and a wide variety of additional functions. Fibaro Flood Sensor is simply remarkable! This unique device can guard you and your family’s safety. With its advanced technology and precision, the Fibaro Flood Sensor will alert you of a threatening flood, or a rapid temperature rise or drop. All while being maintenance-free without the need for professional installation.
In the beginning there was a drop of water...
Water is the most common substance in the world. It gives life, but it can also take it away. Water allows us to enjoy each day and sustained a great feeling of refreshment. The importance of this substance, covering 70% of the world, is so great it inspired us to pay her tribute. The design of the Fibaro Flood Sensor was inspired by the perfect water drop. Every single drop, just like the modules of our system, can exist individually or they can connect with one another, forming a coherent ecosystem. The shape of a water drop is perfect and flawless, therefore our sensor’s enclosure had to look the same. The Flood Sensor is made of high quality, white, glossy plastic and is perfect in every detail. It’s design is extremely functional and the technology gives you endless possibilities.
Perfection in every detail
The Fibaro Flood Sensor is the most technologically advanced, most functional, yet amazingly aesthetic flood sensor available in the world today. Before design process started, Fibaro engineers tested most of the battery powered flood sensors offered. None of them met our expectations. That's why we started working on our own design, meeting high expectations of our customers. That's how the Fibaro Flood Sensor was born - a flood sensor equipped with new technology providing safety for you and your family. All of wich closed in a miniature, compact enclosure.
Dual Tamper protection
Our flood sensor is beautiful, which makes it desirable to grab and take a closer look. We know and completely understand this. Any movement or relocation can stop the sensor from serving its role, that’s why it will be detected thanks to the built-in motion detector. Any attempt to open it will be detected resulting in a report being sent to the main controller as well. Mind you, this is a very important device, bearing huge responsibility, monitoring our home and helping us react quickly.
It's crucial to quickly detect potential threats of a breakdown. With the Fibaro Flood Sensor's compact size, various powering and alarm system communication possibilities, you are guaranteed to be the first one to know about a breakdown and flooding threat. The Sensor may be installed in hard-to-reach places. It can work in any location you need. Even if it can’t be installed in the precise spot needed, you can always connect a wired probe to detect the leak in its best probable location.
One sensor, plenty of possibilities
Our Flood Sensor is a totally uncompromised device. It can be battery or VDC powered, depending on the operating location. The Sensor will work on 12 or 24 VDC. Thanks to the output terminal, Fibaro Flood Sensor can be integrated with any alarm system as well. Input terminal allows for connecting an external contact probe for using the Flood Sensor in places with limited accessibility.
Hard wired Power or battery
You can power the Flood Sensor by 12/24 VDC or a battery which will last 2,5 years.
Alarm systems integration
The Sensor allows for integration with almost any available wired alarm system on the market.
Wired or wireless
The Sensor allows for sending alarm notifications via wires or wirelessly.
Opened enclosure alarm
For safety reasons, Fibaro Flood Sensor's enclosure is protected from being opened, turned off or destroyed. Detecting any tampering will result in household members being notified by SMS, Push or e-mail
Visual Colour Display
One look is enough to find out what happened, thanks to the coloured indicator light. Depending on the Flood Sensor's built-in LED illuminated colour, you will know whether the Sensor has detected water, or a decrease / increase in temperature. With its built-in Z-Wave range tester you can easily determine whether the place you chose for the Sensor allows for communicating with the main controller or maybe you will have to use an external wired probe, to ensure the Sensor's proper operation.
Even before our washing machine and bathtub give us a small flood, various plumbing gives us some warnings, so we should keep a closer eye on them. Small leaks by the bathtub drain or a tiny puddle next to the washing machine drain, definitely should peak our interest. However what to do when the tub is already built in, and leaks are too small to be seen? It’s better to be safe than sorry, and set up a Fibaro System. Flood Sensor is a perfect solution in any location that we might suspect a leak to occur, even if access to the location is very difficult. Such a place might be in a built-in bathtub by the drain, built-in washing machine or dishwasher. Install the Fibaro Flood Sensor in hard to reach areas and have peace of mind. If even the smallest leak will appear, you will get advanced warning on your smartphone and you'll be able to call an expert.
Floor heating is an amazing comfort for people and unfortunately a nightmare for the individual to control correctly. It is very difficult to determine the optimal temperature and turn off the heating at the right time to avoid uncomfortable temperatures. Thanks to the integrated temperature sensor, the Fibaro Flood Sensor will help you manage your floor heating. The Fibaro Home Center 2 will ensure that the temperature is ideal for your family’s comfort, all while being as energy efficient as possible.
Did you know that...
Fibaro has a Universal Sensor that can be combined with an appropriately secured DS18B20 temperature sensor which can then be mounted under the floor surface and even covered with concrete.
It will prevent icing
Because the Fibaro Flood Sensor has no problem handling the harshest conditions, You can easily use it in front of Your house to control the temperature of your driveway. If your driveway is sloped, even the smallest amount of ice can cause your car to skid when you are leaving your garage. Icing can cause a lot of unnecessary accidents. The Fibaro Flood Sensor was perfectly designed to work with warming mats to prevent even the smallest formation of ice around your house..
Helps you detect a fire
It’s not afraid of extreme temperatures. Any sudden temperature change will trigger an alarm in the control panel* and the household will be alerted about it immediately on their mobile device. Thankfully the Fibaro Flood sensor can help detect a fire in its early stages, especially if there are any unknown problems with your current fire detectors. The Fibaro Flood Sensor is the perfect additional level of support for your fire alarm system.
A Perfect Combination
Advanced device associations and extended scenes will allow Your Home Center 2 Control Panel to independently take appropriate steps immediately after detecting a risk of flooding or fire. Even after the smallest liquid detection near the washing machine, the Flood Sensor will send a signal to a Relay Switch which will cut off the solenoid water valve, and disconnect the washing machine which is connected to a Fibaro Wall Plug. In case of fire detection, a Relay Switch disconnects the solenoid gas valve, the control panel ensures lights that mark your escape route are illuminated, and the ventilation system runs at maximum level to get rid of the smoke. These are just some of the possibilities when you associate modules and devices in the Fibaro System.
...reaction adjusted to your preferences...
Difficult to submerge
The sensor is designed to work in the toughest conditions. It works properly at low or high temperatures, from 14°F* to 203°F*. It can handle any type of flood, whether it be fast or slow. The enclosure is waterproof, allowing for direct contact with the liquid and prevents submersion which would cause it to stop communicating. Only this type of sensor can guarantee your safety.
Flooding threat detected by the Fibaro Flood Sensor may result in Fibaro System automatically responding by closing water supply to prevent damage. It's enough to install a solenoid valve in your hydraulic system. The System will be able to operate it automatically via Fibaro Relay Switch connected to it. The Fibaro Flood Sensor in couple with a solenoid valve and a Relay Switch module, means a peace of mind for you, and safety for your home.
"...shut down the water supply..."
Door/ Window Sensor
The Door/window sensor is a battery powered reed sensor. Its operation under the z-wave standard guarantees compatibility with the Fibaro Intelligent System and other Z-Wave gateways. The sensor expands the capabilities of the system by monitoring the opening of doors, windows and garage doors. It is used in automatic light control, access control and home security systems. Installation of the Door / Window Sensor in your home increases the safety and comfort of its inhabitants. It also eliminates the risk of high fees for heating or air conditioning. In addition, the module can be equipped with a temperature sensor, and use the built-in binary input.
Easy and fast installation
Installation of the module is very simple. Just remove it from the box, open the case, remove protective film on the battery and stick it on the surface with the double-sided tape (included). Low power consumption enables up to 2 years of battery life. The system will notify you in advance if battery becomes low. Current battery consumption is always visible in HOME CENTER 2 configuration panel.
The Door/window Sensor is extremely compact and is the smallest unit of this type available on the market. Its extremely lightweight and thin design makes it almost invisible on any window and door.
The Door/window sensor combines the functionality of 4 devices:
Installation of reed sensors in your home will provide the HOME CENTER 2 with additional information, which can be used to control other components within the Fibaro system. The module checks the condition of the opening and closing of any window or door. An opened window canl prevent the system from launching heating or air conditioning in a particular room. Therefore, you will not be exposed to unnecessary costs. When mounting reed sensor on the front door, you can turn on the lights automatically when opening the door and/or run a pre-programmed scene e.g. "Return home". In addition, the Door / Window Sensor can be used as an unauthorized intrusion alarm sensor. These are just some of the capabilities of the Door / Window Sensor.
- Door & Windows
- Garage door
Wireless entry sensor
The Door/Window Sensor may be used together with the HOME CENTER 2 to control other features. Once the Door/Window Sensor input is connected with a typical wall switch it can control other devices within the Fibaro system. The idea behind it is to enable the user to place a previously unplanned switch in a chosen location without ever having to wire cables. The number and location of existing switches no longer limit the arrangement of your interior. The Door/Window Sensor can easily and non-intrusively take up the role of this element of the home electrical system.
The Door/Window Sensor module also works with the DS18B20 temperature sensor (sold separately). This tiny element is installed in the module inputs and added to the Fibaro System. Its installation is very easy. Simply place three leads into the inputs and secure them using the screws. The temperature sensor can greatly expand the number of features available with the Home Center 2. The reed sensor feeds the Fibaro System with information about an open door or window allowing the temperature sensor to collect the necessary data for automatic ventilation of a room without excessive cooling. The temperature sensor may also be used during the planning of a temperature profile at the heating panel.
Pre programed scenes switch
The Door / Window Sensor has a unique feature in which it can automatically trigger pre-programmed scenes. To start a scene on the level of electrical installation has been difficult until now. It required a Fibaro module, previously installed in an electrical device, which would then start a scene. This solution was not intuitive enough so to meet customer demand we gave the Door / Window Sensor the additional functionality to start scenes. Simply connect a traditional light switch or any sensor (e.g. motion detector) to the FIBARO module to trigger a pre-programmed scene to start. Therefore you can create a wireless, battery powered switch for multiple devices ready to work within a short time.
The FIBARO Door / Window Sensor has been designed to receive wireless software updates. Every upgrade of the device takes place seamlessly and without any action. Full automation of the software update is done with comfort and safety guaranteed by the Fibaro team.
The door/window sensor manual
Unleash your fantasy decorating a living-room or bathroom. Create illumination effect to match weather conditions, your mood or a special occasion. 3 million colours on hand, waiting for your ideas!
Fibaro RGBW Controller is one of a kind, advanced wireless 4-colour LED strips controller. Apart from traditional RGB channels it, also supports the additional white light channel, which allows for adding pastel colours to the colour scheme. The device may control up to four analogue sensors..
Home.. just how you like it
LED diodes are widely used in home lighting. LED lighting perfectly suits modern design, helping you feel warm and peaceful depending on your mood.
LED's are extremely energy efficient and relatively inexpensive. As a result they are more frequently used in interior design, to accent certain design features with a delicate light wisp.
Choose your favorite color
We have created an intuitive interface for your Smartphone or tablet, using which choosing your favorite color for each lighting zone is just a child's play. Favorite color bar will change coloring in a living-room or child's room like a touch of magic wand. Lighting programs slider will help you relax starting calming pastel color transitions, harmonizing with music playing in the background. There's a magic ball as well, letting you choose any color you wish. You are a wizard of your well-being.
Create your own colour compositions
We designed four lighting scenes with amazing animation. Immerse yourself in an atmosphere of love and warmth with light simulating lit fireplace, or feel the magic of inspirational morning in the colors of the morning dawn. Recall memories of warm summer weather storms and check the unique magic of colors in the a simulation of a storm. All dangerous situation detected by FIBARO system will be additionally enhanced by visual effects, particularly desirable for the hearing impaired.
House alerts with colors
Your intelligent house reacts to anything happening around and informs you about it with colors of light. Use Fibaro RGBW Controller not only to arrange interior lighting schemes but also to inform you about any event you can imagine.
Thanks to four analogue inputs, Fibaro RGBW Controller may be connected to four independent analogue sensors operating in 0-10V range. Use analogue sensors support to create bathtub illumination informing of water temperature with a colour. Adapt living-room lighting to conditions outside. Help your Fibaro Home Center decide whether to start garden watering depending on signals coming from soil moisture sensors and light intensity sensors.
Fibaro RGBW Controller controls three as well as four colour LED strips giving you milions of colours of light.
Fibaro RGBW Controller has four analogue inputs supporting any sensors, e.g. light sensors, wind sensors, pressure sensors and potentiometers operating within 0-10V range.
Four output channels
Four output channels allow for connecting and independently controlling each of connected light sources.
Good mood provider
Enchant your interior
After hard day's work you deserve to relax. All you have to do is start a programmed relax scene with a push of a button. Your intelligent home will do the rest - adjust the temperature and humidity, music volume and lighting scenes, with help of analogue sensors connected to the module. Pastel colors will help you calm down and forget about the stress. Thanks to Fibaro RGBW Controller you will experience your own haven of peace. Feel warm in your house thanks to Fibaro RGBW Controller.
of analogue sensors
Fibaro RGBW Controller supports up to four analogue sensors, providing Fibaro Home Center 2 with many more information based on which Fibaro System gives you comfort and security.
Thanks to information from analogue sensors, Home Center will roll the awnings to prevent them from being torn by wind, close the windows when it rains or gets cold. Analogue sensors will let you experience a true home intelligence.
4 - channel dimmer
for 12/24V light sources
Fibaro RGBW Controller allows for managing four independent light channels. It's the world's only wireless controller allowing for dimming up to four connected light sources independently. RGBW Controller's versatility ensures correct operation of 12V and 24V light sources as well, without any modifications. This way you don't have to observe the voltage of connected light sources.
Wall Plug USA
Load under control
90o Left - Right rotate
The Fibaro System Tomorrow
Fibaro Multimedia will let you:Control the system from every TV with a HDMI connection.
You are having a quiet evening at home watching a movie, when there is a knock on the door. The movie is paused, lights go on with 30% brightness in the living room and 100% brightness in front of the house. The picture from camera in front of the house appears on your TV screen. You pick up the phone, on which you can see a picture close-up, you have a short conversation and then you open the gate with just one click.Watch videos and managing your private video library.
You can access your favorite videos from wherever your TV is.Listen to your favorite music in any room, thanks to non-invasive audio multi-room.
Imagine... you enter the living room and your favorite music starts playing. You walk into the kitchen, sensor detects your presence and kitchen radio starts playing the same music. But there's more... In the event of fire, all audio devices will play specific message to warn your family..
With Fibaro you can access a large database of service providers, allowing you to immediately respond to any failure in the house. For instance, in case of washing machine leak, the system will automatically provide you with list of plumbers in your neighborhood, along with their contact details, letting you call one of them immediately.
Shopping with Fibaro
The system will be integrated with the largest online stores. When you shop regularly, you waste a lot of time standing in lines at the check-outs. Spend this time with your family instead - Fibaro will do the shopping, pay for it and inform you of the delivery, as soon as the courier arrives.
Fibaro's unique values
With the Fibaro System, you can define scenes and configure dependencies between particular devices by yourself, according to specific incidents, without the need to call any specialist. You will do it in no time, and if you do not like the outcome or simply change your mind, you can reconfigure the system at home or at work within seconds. See how simple it is! * This functionality will be available only in selected countries.
Fibaro is a system created by both enthusiasts and practitioners of intelligent building technology.
We wanted to create a solution available for everyone, therefore, we have developed a top-quality product at a reasonable price. According to data from March 2011, our product is the least expensive of all the competing products in this group available on the world's market.
Explore Fibaro Product Cards
Find Our Solution Package in e-commereceBUY!